Pressure  = Force / Contact Area. Therefore someone has to either reduce Force (usually via decreased activity level) or to increase the Contact Area via a proper orthotic that will follow the morphology of the foot

It measures the foot morphology as this is manipulated by the clinician.

Measurement is at a level of 01.mm

You will need a pressure scanner for this. Amfit works well with Tekscan pressure systems

538 pins

The patient positions the foot on the scanner. The operator manipulates the foot to create the required morphology. Scanning is initiated with the pins rising. They will rise until they are blocked by the foot. The operator will freeze the pins, remove the foot, inspect the frozen pins, and proceed to scan the casting created. The 3D morphology is then digitally transferred to the PC and the operator can make adjustments (e.g. add a heel lift) and add shapes (e.g. offloads and bumps)

Every year in May. Visit our Facebook for announcements.

100 Euros. Food and drinks are included.

Maximum of 15 participants

Go to the  Contact page and leave your details. You will receive further instructions.

Internally it will take us a maximum of 3-4 working days to manufacture the orthotics and deliver them to a shipping courier

We use ACS and Speedex